V3A/B-1 CN HARNESS

R Manual Swipe Magnetic Card Reader V3A Low Cost, Ultra-Compact, Manual Swipe Reader H H H H Low power C-MOS technology Multiple configurations TTL-compatible interface (clock & data) Available with or without cover Ordering Information Magnetic Tracks Supported (R, R/W) IC Contact Interface Cover Cable Color Part Number — No TTL Yes No Ivory V3A-1K — No TTL No No Ivory V3A-1 — — No TTL Yes No Ivory V3A-3K 1 2 3 Center JIS II R R R — R R R — R — — R — — — — No TTL No No Ivory V3A-3 — R — — — No TTL Yes No Ivory V3A-4K — R — — — No TTL No No Ivory V3A-4 — — R — — No TTL Yes No Ivory V3A-5K — — R — — No TTL No No Ivory V3A-5 R R — — — No TTL Yes No Ivory V3A-6K R R — — — No TTL No No Ivory V3A-6 — R R — — No TTL Yes No Ivory V3A-7K — R R — — No TTL No No Ivory V3A-7 R R R — — No TTL Yes No Black V3A-1KB R R R — — No TTL No No Black V3A-1B — R — — — No TTL Yes No Black V3A-4KB — R — — — No TTL No No Black V3A-4B R R — — — No TTL Yes No Black V3A-6KB R R — — — No TTL No No Black V3A-6B — R R — — No TTL Yes No Black V3A-7KB — R R — — No TTL No No Black V3A-7B Note: Cable harness is included with all V3B models. It is optional for V3A. J ACCESSORIES Item Cable harnesses Part Number V3A-1 V3A/B-1 CN Harness V3A-3, 4, 5 V3A-4 CN Harness V3A-6, 7 V3A/B-6/7 CN Harness V3A V3A J TYPICAL APPLICATIONS · Point-of Sale (POS) systems · ID card checkers · Club membership · Access management · Remote terminals for computers Specifications Part Number V3A-jj Recommended card type Magnetic card ISO 7810, 7811/1-6 Recording method FM decoding (F2F) Card feeding speed 10 to 120 cm/second (10 to 100 cm/sec triple track) Service life of magnetic head 300,000 passes Operating power supply Current consumption +5 VDC ±10% Single track 3 mA typical, 5 mA maximum Dual track 6 mA typical, 10 mA maximum Triple track 9 mA typical, 15 mA maximum Mounting location Indoors—away from direct sunlight or wet, humid environment Ambient temperature Operation Ambient humidity --10_ to 55_C (14_F to 131_F) Storage --30_ to 70_C (--22_F to 158_F) Operation 30% to 85% RH Storage 20% to 90% RH Vibration 10 to 150 Hz, single vibration width of 0.15 mm Shock Peak acceleration 19.6 m/sec2 Dimensions With cover 90 W x 26.5 H x 28 D mm (3.54 W x 1.04 H x 1.10 D in) Without cover 90 W x 24 H x 24 D mm (3.54 W x 0.94 H x 0.94 D in) Weight Approx. 45g with cover (30g without cover) Engineering Data J INPUT CIRCUIT DIAGRAM J OUTPUT CIRCUIT DIAGRAM +5 VDC Input DC+5 V R1 R1: 100 k¦p Output 0V 0V 2 V3A V3A J I/O INFORMATION Single Track Connector Triple Track Connector 9-pin Molex connector part number 53261--0990. Applicable Molex socket housing part number 51021--0900. 12-pin Molex connector part number 53048--1210. Applicable Molex socket housing part number 51021--1200. Signal Input/Output Description Signal Input/Output Description 1 0V — — 2 +5 VDC — — 1 0V — — 2 +5 VDC — 3 CSV Input — Current save 3 CSV Input 4 CLS Current save Output Card loaded 4 CLS3 Output 5 Card loaded 3 RCP Output Read clock 5 RCP3 Output Read clock 3 6 RDP Output Read data 6 RDP3 Output Read data 3 7 Not used — — 7 CLS2 Output Card loaded 2 8 Not used — — 8 RCP2 Output Read clock 2 9 Not used — — 9 RDP2 Output Read data 2 10 CLS1 Output Card loaded 1 Double Track Connector 11 RCP1 Output Read clock 1 9-pin Molex connector part number 53261--0990. Applicable Molex socket housing part number 51021--0900. 12 RDP1 Output Read data 1 Pin # Signal Input/Output Description 1 0V — — 2 +5 VDC — — 3 CSV Input Current save 4 CLS2 Output Card loaded 2 5 RCP2 Output Read clock 2 6 RDP2 Output Read data 2 7 CLS1/3 Output Card loaded 1/3 8 RCP1/3 Output Read clock 1/3 9 RDP1/3 Output Read data 1/3 Pin # Pin # 3 V3A V3A Dimensions Unit: mm (inch) J V3A-4K 90 (3.54) 28 (1.10) Card Feed Direction 23 (0.91) 26.5 (1.04) 72 ± 0.2 (2.83 ± 0.008) 18 ± 0.2 (0.71 ± 0.008) 5 (0.20) 80 ± 0.2 (3.15 ± 0.008) 5 (0.20) 2 -- f 2.5 dia. Depth 7 for Mounting Screw (Applicable Screw: M3 Tapping) Note: Tolerances ±0.3mm unless specified 4 V3A V3A J V3A-4 Card Feed Direction Mag. Head 90 (3.54) 24 (0.94) Circuit Board Output Connector pin 9 pin 1 72 ± 0.2 (2.83 ± 0.008) 2 -- f 3.5 dia. for Front Side Mounting Screw (Applicable Screw: M3) 20.5 (0.81) 24 (0.94) 9 (0.35) 18 ± 0.2 (0.71 ± 0.008) 80 ± 0.2 (3.15 ± 0.008) 3 (0.12) 5 (0.20) 2 -- f 2.5 dia. Depth 7 for Reverse Side Mounting Screw (Applicable Screw: M3 Tapping) Note: Tolerances ±0.3mm unless specified 5 V3A V3A NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. R OMRON ELECTRONICS, INC. OMRON CANADA, INC. 1-800-55-OMRON 416-286-6465 One East Commerce Drive Schaumburg, IL 60173 Cat. No. GC CR3 7/00 885 Milner Avenue Scarborough, Ontario M1B 5V8 Specifications subject to change without notice. 6 Printed in U.S.A.